RUT850
RUT850 is a compact and slim design LTE wireless router
- Router RUT850
- Power cable (2 m)
- 2 x LTE antennas (adhesive, FAKRA-D, 3 m cable)
- 1 x GNSS antenna (adhesive, FAKRA-C, 3 m cable) – only for GNSS version
- 2 x screws
- 2 x adhesive tape profiles
- 2 x hook and loop profiles
- QSG (Quick Start Guide)
|
MOBILE |
|
|
Mobile module |
4G (LTE) – Cat 4 up to 150 Mbps, 3G – Up to 42 Mbps, 2G – Up to 236.8 kbps. |
|
Status |
Signal strength (RSSI), SINR, RSRP, RSRQ, EC/IO, RSCP Bytes sent/received |
|
SMS |
SMS status, SMS configuration, send/read SMS via HTTP POST/GET, EMAIL to SMS (optional), SMS to EMAIL(optional), SMS to HTTP (optional), SMS to SMS (optional), scheduled SMS, SMS autoreply, SMPP (optional) |
|
Black/White list |
Black/White list |
|
Multiple PDN (optional) |
Possibility to use different PDNs for multiple network access and services |
|
WIRELESS |
|
|
Wireless mode |
IEEE 802.11b/g/n, Access Point (AP), Station (STA) |
|
WiFi |
WPA2-Enterprise (with external/internal Radius server), WPA2-PSK, WPA-PSK, WEP, MAC Filter |
|
WiFi security |
WPA2-Enterprise - PEAP, TLS, TTLS, AES-CCMP, TKIP, Auto Cipher modes, Client separation |
|
SSID |
SSID stealth mode and access control based on MAC address |
|
WiFi users |
up to 80 simultaneous connections |
|
Hotspot |
Captive portal (Hotspot), internal/external Radius server , built in customizable landing page |
|
NETWORK |
|
|
Routing |
Static routing, Dynamic routing (Optional - BGP, OSPF v2, RIP v1/v2) |
|
Network protocols |
TCP, UDP, IPv4, IPv6, ICMP, NTP, DNS, HTTP, HTTPS, FTP, SMTP, SSL v3, TLS, ARP, VRRP, PPP, PPPoE, UPNP, SSH, DHCP, Telnet, SMPP, MQTT (optional) SMPP, MQTT, VoIP passthrough support |
|
Connection monitoring |
Ping Reboot, Periodic Reboot, LCP and ICMP for link inspection |
|
Firewall |
Port forward, traffic rules, custom rules |
|
DHCP |
Static and dynamic IP allocation |
|
QoS |
Traffic priority queuing by source/destination, service, protocol or port |
|
DDNS |
Supported >25 service providers, others can be configured manually |
|
Network backup |
Mobile and WiFi WAN options, each of which can be used as backup |
|
Load balancing (optional) |
Balance your internet traffic over multiple WAN connections |
|
NetSnapper (optional) |
Mobile connection management, data compression VPN client (not available in standard FW) |
|
SSHFS (optional) |
Possibility to mount remote file system via SSH protocol (not available in standard FW) |
|
SECURITY |
|
|
Authetication |
Pre-shared key, digital certificates, X.509 certificates |
|
Firewall |
Pre-configured firewall rules can be enabled via web-ui, unlimited firewall configuration via CLI; DMZ; NAT; NAT-T |
|
Attack prevention |
DDOS prevention (SYN flood protection, SSH attack prevention, HTTP/HTTPS attack prevention), port scan prevention ( SYN-FIN, SYN-RST, X-mas, NULL flags, FIN scan attacks) |
|
WiFi security |
WPA2-Enterprise – PEAP, EAP-TLS, TLS, TTLS. AES-CCMP, TKIP, Auto Cipher modes. Client separation |
|
Mobile quota control |
Set up custom data limits for the SIM card |
|
WEB filter |
Blacklist for blocking out unwanted websites, whitelist for specifying allowed sites only |
|
Access control |
Flexible access control of TCP, UDP, ICMP packets, MAC address filter |
|
VPN |
|
|
OpenVPN |
Multiple clients and server can be running simultaneously, 12 encryption methods |
|
OpenVPN Encryption |
DES-CBC, RC2-CBC, DES-EDE-CBC, DES-EDE3-CBC, DESX-CBC, BF-CBC, RC2-40-CBC, CAST5-CBC, RC2-64-CBC, AES-128-CBC, AES-192-CBC, AES-256-CBC |
|
IPsec (optional) |
IKEv1, IKEv2, supports up to 4x VPN IPsec tunnels (instances), with 5 encryption methods (DES, 3DES, AES128, AES192, AES256) |
|
GRE (optional) |
GRE tunnel |
|
PPTP, L2TP (optional) |
Client/Server services can run simultaneously |
|
MONITORING & MANAGEMENT |
|
|
WEB UI |
HTTP/HTTPS, status, configuration, FW update, CLI ,troubleshoot, event log, system log, kernel log |
|
FOTA |
Firmware update from sever, automatic notification. |
|
SSH |
SSH (v1, v2) |
|
SMS |
SMS status, SMS configuration, send/read SMS via HTTP POST/GET |
|
TR-069 |
OpenACS, EasyCwmp, ACSLite, tGem, LibreACS, GenieACS, FreeACS, LibCWMP, Friendly tech, AVsystems |
|
MQTT (optional) |
MQTT Broker, MQTT publisher |
|
SNMP (optional) |
SNMP (v1, v2, v3), SNMP trap |
|
JSON-RPC |
Management API over HTTP/HTTPS |
|
RMS |
Teltonika Remote Management System (RMS) |
|
SYSTEM CHARACTERISTICS |
|
|
CPU |
Atheros Hornet, MIPS 74Kc, 550MHz |
|
RAM |
64MB, DDR2 |
|
FLASH memory |
16MB SPI Flash |
|
FIRMWARE / CONFIGURATION |
|
|
WEB UI |
Update FW from file, check FW on server, configuration profiles, configuration backup, restore point |
|
FOTA |
Update FW/configuration from server |
|
RMS |
Update FW/configuration for multiple devices |
|
Keep settings |
Update FW without losing current configuration |
|
FIRMWARE CUSTOMIZATION |
|
|
Operating system |
RutOS powered by Linux based on OpenWRT |
|
Supported languages |
Busybox shell, Lua, C, C++ |
|
Development tools |
GPL package with built environment provided |
|
LOCATION TRACKING |
|
|
GNSS |
GPS, GLONASS, BeiDou, Galileo and QZSS |
|
Coordinates |
GNSS coordinates via WebUI, SMS, TAVL, RMS |
|
NMEA |
NMEA 0183 |
|
Server software |
supported server software TAVL, RMS |
|
Mobile Network Geolocation |
Location without using GPS, get approximate location based on mobile tower on RMS |
|
Startup |
Hot start <2.5s, Warm start <26s, Cold start <35s |
|
Tracking |
55 simultaneous satellites channels |
|
Sensitivity |
-157 dBM |
|
Accuracy |
< 1.5m |
|
POWER |
|
|
Connector |
4 pin DC power socket |
|
Input voltage range |
9 – 30 VDC (4 pin industrial socket), reverse polarity protection, overvoltage protection up to 60VDC, surge protection >66VDC 10us max. |
|
Power consumption |
< 5W |
|
PHYSICAL INTERFACES (PORTS, LEDS, ANTENNAS, BUTTONS, SIM) |
|
|
Status LEDs |
3 x connection type status LEDs, 1 x r WiFi status LED, 5 x connection strength LEDs, 1 x Power LED |
|
SIM |
1 x SIM slots (Mini SIM – 2FF, 2st form factor), 1.8V/3V, external SIM holder |
|
Power |
4 pin DC connector |
|
Anntenas |
2 x RG174 connectors for LTE |
|
Reset |
Reset/restore to default button |
|
PHYSICAL SPECIFICATION |
|
|
Casing material |
Plastic housing, plastic panels |
|
Dimensions |
131 mm x 79 mm x 18 mm (H x W x D) |
|
Weight |
115 g |
|
OPERATING ENVIRONMENT |
|
|
Operating temperature |
-40 °C to 75 °C |
|
Operating humidity |
10% to 90% non-condensing |
|
Ingress Protection Rating |
IP30 |
|
MTBF |
290000 h |
|
REGULATORY & TYPE APPROVALS |
|
|
Regulatory |
CE/RED, EAC, RoHS, WEEE |
|
Operator |
AT&T, Verizon (planned) |
|
Vehicle |
ECE approval mark, e-mark (E26) Regulation No. 10 R, Amendment 05, Supplement 01 |
|
EMI IMMUNITY |
|
|
Standards |
Draft EN 301 489-1 V2.2.0, Draft EN 301 489-17 V3.2.0, Draft EN301 489-52 V1.1.0 |
|
ESD |
EN61000-4-2:2009 |
|
RF |
EN 61000-4-3:2006, A1:2008 and A2:2010 |
|
EFT |
EN 61000-4-4:2012 |
|
Surge protection |
EN 61000-4-5:2006 |
|
RC |
EN 61000-4-6:2009 |
|
DIP |
EN 61000-4-11:2004 |
