RUT955
LTE dual SIM router with WiFi, 4x Ethernet ports, I/O, RS232, RS485, GNSS
- Router RUT955
- Euro PSU
- 2 x LTE antennas (magnetic mount, SMA male, 3 m cable)
- 2 x WiFi antennas (magnetic mount, RP-SMA male, 1.5 m cable)
- RS485 connector block
- I/O connector block
- Ethernet cable (1.5 m)
- QSG (Quick Start Guide)
MOBILE |
||
Mobile module |
4G (LTE) – Cat 4 up to 150 Mbps, 3G – Up to 42 Mbps, 2G – Up to 236.8 kbps. |
|
SIM switch |
2 SIM cards, auto-switch cases: weak signal, data limit, SMS limit, roaming, no network, network denied, data connection fail, SIM idle protection |
|
Status |
Signal strength, SINR, RSRPO, RSRQ, Bytes sent/received |
|
Bridge |
Direct connection (bridge) between mobile ISP and device on LAN |
|
SMS |
SMS status, SMS configuration, send/read SMS via HTTP POST/GET, EMAIL to SMS, SMS to EMAIL, SMS to HTTP, SMS to SMS, scheduled SMS, SMS autoreply, SMPP |
|
Black/White list |
Operator black/white list |
|
Multiple PDN (optional) |
Possibility to use different PDNs for multiple network access and services |
|
WIRELESS |
||
Wireless mode |
IEEE 802.11b/g/n, Access Point (AP), Station (STA) |
|
WiFi |
WPA2-Enterprise (with external/internal Radius server), WPA2-PSK, WPA-PSK, WEP, MAC Filter |
|
WiFi security |
WPA2-Enterprise - PEAP, TLS, TTLS. AES-CCMP, TKIP, Auto Cipher modes. Client separation |
|
SSID |
SSID stealth mode and access control based on MAC address |
|
WiFi users |
up to 100 simultiniuos connections |
|
Hotspot |
Captive portal (Hotspot), internal/external Radius server , built in customizable landing page |
|
ETHERNET |
||
WAN |
1 x WAN (can be configured to LAN) 10/100 Mbps, comply IEEE 802.3, IEEE 802.3u standards, supports auto MDI/MDIX |
|
LAN |
3 x LAN ports, 10/100 Mbps, comply IEEE 802.3, IEEE 802.3u standards, supports auto MDI/MDIX |
|
NETWORK |
||
Routing |
Static routing, Dynamic routing (BGP, OSPF v2, RIP v1/v2) |
|
Network protocols |
TCP, UDP, IPv4, IPv6, ICMP, UDP, NTP, DNS, HTTP, HTTPS, FTP, SMTP, SSL v3, TLS, ARP, VRRP, PPP, PPPoE, UPNP, SSH, DHCP, Telnet, SMPP, MQTT |
|
VoIP passthrough support |
H.232 and SIP-alg protocol NAT helpers, allowing proper routing of VoIP packets |
|
Connection monitoring |
Ping Reboot, Periodic Reboot, LCP and ICMP for link inspection |
|
Firewall |
Port forward, traffic rules, custom rules |
|
DHCP |
Static and dynamic IP alocation |
|
QoS |
Traffic priority quening by source/destination, service, protocol or port |
|
DDNS |
Supported >25 service providers, others can be configured manually |
|
Network backup |
VRRP, Mobile, Wired and WiFi WAN options, each of which can be used as backup |
|
Load balancing |
Balance your internet traffic over multiple WAN connections |
|
NetSnapper (optional) |
Mobile connection management, data compression VPN client (not available in standard FW) |
|
SSHFS (optional) |
Possibility to mount remote file system via SSH protocol (not available in standard FW) |
|
SECURITY |
||
Authetication |
Pre-shared key, digital certificates, X.509 certificates |
|
Firewall |
Pre-configured firewall rules can be enabled via web-ui, unlimited firewall configuration via CLI; DMZ; NAT; NAT-T |
|
Atack prevention |
DDOS prevention (SYN flood protection, SSH attack prevention, HTTP/HTTPS attack prevention), port scan prevention ( SYN-FIN, SYN-RST, X-mas, NULL flags, FIN scan attacks) |
|
WiFi security |
WPA2-Enterprise - PEAP, TLS, TTLS. AES-CCMP, TKIP, Auto Cipher modes. Client separation |
|
VLAN |
Port based and tag based VLAN separation |
|
Mobile quota control |
Set up custom data limits for both SIM cards |
|
WEB filter |
Blacklist for blocking out unwanted websites, whitelist for specifying allowed sites only |
|
Access control |
Flexible access control of TCP, UDP, ICMP packets, MAC address filter |
|
VPN |
||
OpenVPN |
Multiple clients and server can be running simultaneously, 12 encryption methods |
|
OpenVPN Encryption |
DES-CBC, RC2-CBC, DES-EDE-CBC, DES-EDE3-CBC, DESX-CBC, BF-CBC, RC2-40-CBC, CAST5-CBC, RC2-64-CBC, AES-128-CBC, AES-192-CBC, AES-256-CBC |
|
IPsec |
IKEv1, IKEv2, supports up to 4x VPN IPsec tunnels (instances), with 5 encryption methods (DES, 3DES, AES128, AES192, AES256) |
|
GRE |
GRE tunnel |
|
PPTP, L2TP |
Client/Server services can run simultaneously |
|
MONITORING & MANAGEMENT |
||
WEB UI |
HTTP/HTTPS, status, configuration, FW update, CLI ,troubleshoot, event log, system log, kernel log |
|
FOTA |
Firmware update from server, automatic notification. |
|
SSH |
SSH (v1, v2) |
|
SMS |
SMS status, SMS configuration, send/read SMS via HTTP POST/GET |
|
TR-069 |
OpenACS, EasyCwmp, ACSLite, tGem, LibreACS, GenieACS, FreeACS, LibCWMP, Friendly tech, AVsystems |
|
MQTT |
MQTT Broker, MQTT publisher |
|
SNMP |
SNMP (v1, v2, v3), SNMP trap |
|
JSON-RPC |
Management API over HTTP/HTTPS |
|
MODBUS |
MODBUS TCP status/control |
|
RMS |
Teltonika Remote Management System (RMS) |
|
SYSTEM CHARACTERISTICS |
||
CPU |
Atheros Wasp, MIPS 74Kc, 550MHz |
|
RAM |
128MB, DDR2 |
|
FLASH memory |
16MB SPI Flash |
|
FIRMWARE / CONFIGURATION |
||
WEB UI |
Update FW from file, check FW on server, configuration profiles, configuration backup, restore point |
|
FOTA |
Update FW/configuration from server |
|
RMS |
Update FW/configuration for multiple devices |
|
Keep settings |
Update FW without loosing current configuration |
|
FIRMWARE CUSTOMIZATION |
||
Operating system |
RutOS powered by Linux based on OpenWRT |
|
Supported languages |
Busybox shell, Lua, C, C++ |
|
Development tools |
GPL package with built environment provided |
|
LOCATION TRACKING |
||
GNSS |
GPS, GLONASS |
|
Coordinates |
GNSS coordinates via WebUI, SMS, TAVL, RMS |
|
NMEA |
NMEA 0183 |
|
NTRIP |
NTRIP protocol (Networked Transport of RTCM via Internet Protocol) |
|
Server software |
supported server software TAVL, RMS |
|
Mobile Network Geolocation |
Location without using GPS, get approximate location based on mobile tower on RMS |
|
SERIAL CONNECTIVITY |
||
RS232 |
DB9 connector, full RS232 (with RTS,CTS) |
|
RS485 |
RS485 Full Duplex (4 wires) and Half Duplex (2 wires). 300-115200 baud rate |
|
Serial functions |
Console, Serial over IP, Modem, Modbus gateway, NTRIP Client |
|
INPUT/OUTPUT |
||
Input |
3 x Input (0 - 3 V digital input / 0 - 30 V digital galvanically isolated input / 0 - 24 V analog input) |
|
Output |
2 x Output (30 V, 250 mA digital open collector output / 40 V, 4 A SPST relay output) |
|
Events |
SMS, EMAIL, RMS |
|
USB |
||
Data rate |
USB 2.0 |
|
Applications |
Samba share, custom scripts |
|
External devices |
Possibility to connect external HDD, flash drive, additional modem |
|
SD CARD |
||
Physical size |
Micro SD |
|
Aplications |
Samba share, custom scripts |
|
Capacity |
Up to 32GB |
|
POWER |
||
Connector |
2 pin industrial DC power socket |
|
Input voltage range |
9 – 30 VDC (2 pin industrial socket, 5mm pin pitch), reverse polarity protection, voltage surge/transient protection |
|
PoE (passive) |
Passive PoE over spare pairs. Posibility to power up through LAN port, not compatible with IEEE802.3af and 802.3at standards |
|
Power consumption |
< 2W idle, < 7W Max. |
|
PHYSICAL INTERFACES (PORTS, LEDS, ANTENNAS, BUTTONS, SIM) |
||
Ethernet |
4 x RJ45 ports, 10/100 Mbps |
|
Status LEDs |
1 x bi-color connection status LED, 5x connection strength LEDs, 4x LAN status LEDs, 1x Power LED |
|
SIM |
2 x SIM slots (Mini SIM - 2FF, 2st form factor), 1.8V/3V |
|
Power |
2 pin industrial DC power socket |
|
Input/output |
10 pin industrial socket for inputs/outputs: |
|
Anntenas |
2 x SMA for LTE, 1 x SMA for GNNS, 2 x RP-SMA for WiFi antenna connectors |
|
USB |
USB A socket for external devices |
|
SD card |
Micro SD card slot |
|
RS232 |
DB9 socket for full-featured RS232 |
|
RS485 |
6 pin industrial socket for 2/4 wire RS485 |
|
Reset |
Reset/restore to default button |
|
PHYSICAL SPECIFICATION |
||
Casing material |
Aluminium housing, plastic panels |
|
Dimensions |
80 mm x 106 mm x 46 mm (H x W x D) |
|
Weight |
280 g |
|
Mounting options |
DIN rail (can be mounted on two sides), flat surface placement |
|
OPERATING ENVIRONMENT |
||
Operating temperature |
-40 °C to 75 °C |
|
Operating humidity |
10% to 90% non-condensing |
|
Ingress Protection Rating |
IP30 |
|
MTBF |
230000 h |
|
REGULATORY & TYPE APPROVALS |
||
Regulatory |
CE/RED, FCC, R&TTE, EAC, PTCRB (in progress) RoHS, WEEE |
|
Operator |
AT&T, Verizon (planned) |
|
Vehicle |
ECE approval mark, e-mark (E26) Regulation No. 10 R, Amendment 05, Supplement 01, SAE J1455 Revised AUG94 |
|
EMI IMMUNITY |
||
Immunity |
EN 55024:2010 |
|
Radio disturbance |
EN 55022:2010 |
|
ESD |
EN 301 489 V2.1.1 (EN61000-4-2:2009) |
|
RF |
EN 301 489 V2.1.1 ( EN 61000-4-3:2006, A1:2008 and A2:2010) |
|
EFT |
EN 301 489 V2.1.1 (EN 61000-4-4:2013) |
|
Surge protection |
EN 301 489 V2.1.1 (EN 61000-4-5:2014) |
|
RC |
EN 301 489 V2.1.1 (EN 61000-4-6:2014) |
|
ENVIRONMENTAL TESTING |
||
Anti-shock/Drop/Vibration |
IEC 60950-1:2005 (Second Edition) + Am 1:2009 + Am 2:2013, EN 60950-1:2006 + A1:2010 + A2:2013 + A11:2009 +A12:2011 |
|
Impact strength |
IEC 60950-1:2005 (Second Edition) + Am 1:2009 + Am 2:2013, EN 60950-1:2006 + A1:2010 + A2:2013 + A11:2009 +A12:2011 |